HDPLEX Fanless PC Case

Monthly Archives: January 2015

HDPLEX fanless H1.S PC Case Kaveri Build

Original Review from HDPLEX fanless Computer Forum

Hi there! Just sharing this build for your inspiration. I played a while with the idea of trying an AMD kaveri apu, but was sick of whirring fans and cases that are bigger than my screen. Therefore, after some research for components, the HDPlex H1.S seemed perfect for my needs:

HDPLEX H1.S Fanless mini ITX PC case
Gigabyte F2A88XN-Wifi
AMD A8-7600
4GiB GSkill RipJawsX (leftover from previous build)
64GiB OCZ Vertex3 (idem)

The gigabyte motherboard has it 24pin on the side, so I went with the 2/4 heatpipe configuration instead of 3 each way. The USB3.0 cable of the HS.1 had a soldering fault, but HDPlex is sending a new one and I have no haste since the motherboard also has two. Btw: I used some Arctic Silver MX4 instead of the paste that came with the case. The “barbell” for applying it isn’t very convenient, but does the job. Remember to put good pressure on it, both when applying as when fastening the heatpipes.

For power supply I ordered the 120W internal AC-DC converter and the 160W DC-ATX adapter, which would seem to suffice since I did not need any extension cards. However, halfway through installing the OS, the converter failed (blown capacitor?). Whether this was overloaded or a fabrication fault I don’t know, but HDPlex was so kind to refund it. Now I’m using only the DC-ATX adapter and provide power with an old 19V laptop psu. Works perfectly!

Haven’t been doing 3D rendering, but day-long work playing music and video doesn’t heat the case above touching-ability. I wonder if it can be put under de foot of my screen; perhaps with some room above the air gaps in the case top? Anyway, here are some pictures:

HDPLEX H1.S Fanless PC Kaveri Build

HDPLEX H1.S Fanless PC Kaveri Build

HDPLEX H1.S Fanless PC Kaveri Build

HDPLEX H1.S Fanless PC Kaveri Build

HDPLEX H1.S Fanless PC Kaveri Build

HDPLEX released the first Internal AC Power Adapter solution for Intel NUC and Thin-ITX platform

HDPLEX, a fanless computer manufacture, released the first Internal AC Power Adapter solution for Intel NUC and Thin-ITX platform
The HDPLEX Internal 80W AC Adapter with 19VDC output is available for sale at HDPLEX webstore.
Customer can also purchase it from Amazon.

HDPLEX Internal 80W AC Adapter with 19VDC Output for Intel NUC and Thin ITX has the following unique features.

Fanless Internal AC-DC adapter with 19VDC output for Intel NUC
Support Thin ITX with Molex 2PIN Male output
Sealed Aluminum shell working with HDPLEX chassis to dissipate heat and ensure max safety
Support International 110V-240V 50/60hz AC input
High Quality IEC C14 Socket with EMI filter
High Efficiency and Completely Silent

The HDPLEX internal 80W AC adapter has 2PIN male molex output which could plugged onto the NUC and Thin ITX onboard 2PIN 19VDC input.

HDPLEX Internal AC adapter for Intel NUC

HDPLEX Internal AC adapter for Intel NUC

HDPLEX Internal AC adapter for Intel NUC

HDPLEX Internal AC adapter for Intel NUC

The HDPLEX Internal 80W AC Adapter could also work with HDPLEX 160W DC-ATX converter to became an all-in-one internal power supply solution/combo for ATX PC platform.

HDPLEX Internal AC adapter with HDPLEX DC-ATX Converter combo

The HDPLEX Internal 80W AC Adapter has very small footprint and ears on both side of easy installation.

HDPLEX Internal 80W AC adapter dimension

HDPLEX Internal 80W AC Adapter package content:

HDPLEX Internal 80W AC adapter package content

Last, HDPLEX H1.SODD fanless computer case supports HDPLEX Internal 80W AC Adapter.

HDPLEX Internal 80W AC adapter for H1.SODD Fanless Computer case

HDPLEX STORE | Blog Admin